Hypervelocity impact induced shock acoustic emission waves for quantitative damage evaluation using in situ miniaturized piezoelectric sensor network

Manmade debris and natural meteoroids, travelling in the Low Earth Orbit at a speed of several kilometers per second, pose a severe safety concern to the spacecraft in service through the HyperVelocity Impact(HVI). To address this issue, an investigation of shock Acoustic Emission(AE) waves induced by HVI to a downscaled two-layer Whipple shielding structure is performed,to realize a quantitative damage evaluation. Firstly a hybrid numerical model integrating smoothparticle hydrodynamics and finite element is built to obtain the wave response. The projectiles, with various impact velocities and directions, are modelled to impact the shielding structure with different thicknesses. Then experimental validation is carried out with built-in miniaturized piezoelectric sensors to in situ sense the HVI-induced AE waves. A quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of obtained AE signals in experiment. Based on the understanding of HVI-induced wave components, assessment of the damage severity, i.e., whether the outer shielding layer is perforated or not, is performed using the energy ratio between the regions of ‘‘high frequency" and ‘‘low frequency" in the acquired AE signals. Lastly, the direct-arrival fundamentalsymmetric wave mode is isolated from each sensing signal to be input into an enhanced delay-andsum algorithm, which visualizes HVI spots accurately and instantaneously with different sensor network configuration. All these works demonstrate the potential of quantitative, in situ, and real time HVI monitoring using miniaturized piezoelectric sensor network.     

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

A constitutive model that can describe the damage evolution of anisotropic metal sheets during the complex forming processes which experience wide stress triaxiality history is essential to accurately predict the deformation and rupture behaviors of the processes. In this study, a modified Lemaitre damage criterion which couples with the anisotropic Barlat 89 yield function is established. The effects of stress triaxiality, Lode parameter and shear stress on damage accumulation are considered in the constitutive model. The model is numerically implemented and applied to fracture prediction in tensile tests with different stress triaxialities and a complex deformation process with wide stress triaxiality history. The good consistency of predictions and experiments indicates that the modified Lemaitre damage model has excellent fracture prediction ability. Finally, the accuracy of the model is analyzed and discussed.     

C/SiC复合材料紧固件拉-拉疲劳行为研究

为了研究C/SiC复合材料紧固件的拉-拉疲劳行为,在疲劳应力比为0. 1、加载频率为10 Hz的条件下对不同应力水平的疲劳寿命进行统计。采用断口分析和金相分析方法对C/SiC复合材料螺钉疲劳破坏的细观机制进行了研究。结果表明:C/SiC复合材料螺钉拉-拉疲劳包含拉断疲劳及拉脱疲劳两种失效形式;基于双参数幂指数形式的寿命模型,两种失效形式的疲劳寿命经验公式相似;C/SiC复合材料螺钉的疲劳极限约为拉伸强度的65%～70%,若最大疲劳应力大于0. 7σmax,其材料损伤随循环次数增多而明显增大。     

机载蒸发循环系统结构的稳健性研究

机载蒸发循环系统结构的疲劳寿命易受外界和内部环境的影响,导致无法满足设计要求。采用随机有限元法,参照设计变量和随机变量的变异性,建立机载蒸发循环系统结构疲劳寿命稳健性优化的数学模型;通过引入权因子α,将稳健性优化问题转化为结构疲劳寿命均值和标准差的双目标优化问题。结果表明:合理设置疲劳寿命均值和标准差的权因子,可有效降低设计变量和随机变量对变异的敏感性,进而提高机载蒸发循环系统结构疲劳寿命的稳健性。     

扩散连接界面缺陷对Ti-6Al-4V合金力学性能的影响

研究了φ4mm与φ2mm的扩散连接界面缺陷对Ti-6Al-4V合金力学性能的影响。当拉伸载荷方向与缺陷平面平行时,材料的强度与塑性与无缺陷材料相当,这是由于此类缺陷对样品受力截面的面积几乎没有影响。含有φ4mm缺陷试样的拉压疲劳寿命展现出很大的分散性,界面缺陷并未成为裂纹萌生的唯一位置。从表面起裂的样品均处于高寿命区域,而绝大部分从缺陷处起裂的样品均落于低寿命区域。有限元分析表明,当缺陷位于中心位置时其引起的应力集中较小,应力分布梯度较小;缺陷位于边缘位置时,应力集中效应增大。     

缺陷对高温合金蜂窝板弯曲力学性能的影响

采用预埋缺陷的方法,制备含有面芯脱焊缺陷的高温合金蜂窝板,进行了三点弯曲试验,研究了缺陷形状、大小、位置和蜂窝芯取向对蜂窝板三点弯曲损伤模式和承载能力的影响.研究发现,含面芯脱焊缺陷的蜂窝板在缺陷受压部位产生反向鼓包,并沿着宽度方向扩展为完全破坏;随着缺陷尺寸的增大,蜂窝板承载能力逐渐降低;当缺陷位于三点弯曲受拉面时,蜂窝板具有更高的三点弯曲极限载荷,且矩形缺陷试样的弯曲极限载荷要高于相同缺陷面积的圆形试样.最后,利用LS-DYNA对含圆形缺陷高温合金蜂窝板的三点弯曲性能进行了数值模拟分析,得到其三点弯曲过程中的应力分布状态.     

泡沫夹层结构复合材料准静态压痕实验

研究了两种芯材高度的泡沫夹层结构复合材料在准静态压痕力下的损伤过程与形式,通过控制压头位移得到位移与接触力的关系曲线以及不同位移下的损伤形貌,比较了两种芯材的损伤过程.结果表明:损伤过程为泡沫塌陷、泡沫芯材出现裂纹、夹层板上蒙皮分层和芯材与下蒙皮脱粘;损伤形式为:厚芯材时裂纹与泡沫厚度方向成±45.,薄芯材时裂纹与泡沫厚度方向成90°.     

结构系统静强度与疲劳耦合可靠性的当量寿命分析

基于结构系统静强度和疲劳耦合可靠性分析方法,给出了元件静强度失效的当量寿命和当量损伤的概念。结合蒙特卡罗分析方法,讨论了当量损伤服从正态分布、对数正态分布、极值Ⅰ型分布和威布尔分布时当量寿命的概率分布形式。分析结果表明：当量损伤服从正态分布、对数正态分布、极值Ⅰ型分布时,当量寿命服从对数正态分布;当量损伤服从威布尔分布...     

微流星体高速撞击航天器Whipple防护结构损伤特性研究(英文)

采用金刚石模拟高脆性、高熔点微流星体材料,对航天器典型Whipple防护结构进行高速撞击试验.试验表明,撞击产生的高温高压效应导致金刚石部分或全部转化为石墨,金刚石对防护结构的损伤主要体现在中低速阶段,当撞击速度大于4.3km/s时,对后板的灼烧损伤极为显著。     

Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.